The Biggest Mistakes Made in the Installation and Operation of Reverse Osmosis Systems

February 28, 2019 6:25 pm Leave your thoughts

Reverse osmosis systems are of high quality and work wonders on water, but if they are not implemented or used properly, they won’t work as well as they otherwise might. It’s important for your business to consider the biggest mistakes often made with reverse osmosis systems. Doing so can ensure your system works well for longer, saving you a headache and the extra investment involved.

If you’re considering installing an industrial reverse osmosis system in Cincinnati, OH, read on for more information on common mistakes so you can walk into the purchase with your eyes wide open:

  • Feed water temperature issues: For a reverse osmosis system to work effectively and more quickly, the company installing the system must ensure that it’s designed properly to work during any temperature variations. With this in mind, make sure to discuss the average temperatures throughout the year in your area when consulting on the system design. Companies that don’t do this will suffer from lower performance if, for example, the system is not designed with the idea that feed water temperatures may be close to zero during some months.
  • Chemicals and elements: Another factor to examine during the design phase involves an in-depth analysis of the feed water for the chemicals and elements it might bring to the reverse osmosis system. Chlorine is often used in water coming from a municipal water system, and iron is often found in water from bore hole water supplies. Both of these will damage a reverse osmosis membrane, which means your system will not function properly for as long. The company installing your RO system must make sure to counteract these with special units in the system.
  • Water hardness: Many areas have hard water, and this causes another problem for RO membranes that will quickly become damaged. Almost all reverse osmosis systems require that the water be treated with a water softener, so this is something else to consider in designing the system itself.
  • Clean-in-place (CIP) rigs: One major mistake that some businesses make to save a few bucks is to leave out a CIP rig. This rig would help to rescue and save RO membranes by allowing them to be cleaned and disinfected within the system itself. Many companies opt out of this and then end up replacing RO membranes way more often than would otherwise be necessary, costing them in the long run.

As you prepare to invest in an industrial reverse osmosis system in Cincinnati, OH, make sure to work with a reputable company to ensure that you avoid any of these common mistakes. Ultra Pure Water Technologies is the best option in the Ohio area. With 20 years in the business of commercial and industrial water purification, we know the business in and out and will help you through any snags with our team of seasoned experts.

Ultra Pure Water Technologies offers a huge range of services, including reverse osmosis systems, as well as water softeners, filter replacements, carbon filtration and deionization systems. Call today for more information on our services!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *